Using your Apple remote
Use the Apple Remote to control Apple TV settings and navigate your content. Make sure there are no obstructions between the remote and Apple TV
Basic remote functions
Pairing Apple TV with a remote
The Apple Remote works with the built-in IR receiver on Apple TV. To set Apple TV to work with only the included remote, pair Apple TV and the remote.
To pair Apple TV with the included remote:
- Keep the remote pointed directly at Apple TV.
- Hold down Menu and Right for 6 seconds.
- Choose Settings from the Apple TV main menu.
- Choose General > Remotes > Pair Apple Remote.
Unpairing Apple TV from a remote
If you lose the Apple Remote that you paired Apple TV with, you can use another Apple Remote to unpair Apple TV from the lost remote.
To unpair Apple TV from a paired remote:
- Keep the remote pointed directly at Apple TV.
- Hold down Menu and Left for 6 seconds.
- Choose Settings from the Apple TV main menu.
- Choose General > Remotes > Unpair Apple Remote.
Changing the remote battery
When the battery charge in your Apple Remote is low, Apple TV displays a picture of a remote and a warning symbol. Replace the battery with a CR2032 battery
To replace the battery:
- Use a coin to remove the battery compartment cover.
- Remove the battery.
- Insert a CR2032 battery with the positive side facing up.
- Replace the battery compartment cover and use a coin to tighten it.
Important: Dispose of the used battery according to your local environmental laws and guidelines.
Renting movies and purchasing TV shows